Products - Profire 1100
Manual
Features
- Dual Flame sensing modes for safety.
- Ionization and K Thermocouple
- All the electronics in the main case, only the ignition
coil is mounted externally to the case.
- Blue LED display.
- Operator information displayed on front panel include: thermocouple
temperature, flame status, valve status and operation modes.
|
 |
- Front panel has buttons for control of Pilot, Main Valve, Spark,
Operation Modes, Configuration and an ESD button.
- Manual Mode and Automatic Re-light Mode.
- START/STOP contact input for RTU/PLC control.
- LOCKOUT contact input for connection to safety interlock devices.
- PRESSURE SWITCH contact input for fuel pressure verification.
- ESD contact input for connection to shutdown alarms.
- Flame failure alarm contact output with three alarm/status modes.
- Pilot and Main solenoid outputs can drive multiple solenoids.
- Low power polarity protected 12 volt or 24 volt DC operation, solar
powered packages available.
- Temperature rated from -45C to +55C
- Nema 4X fiberglass case with outdoor UV resistant front panel.
Canada
- CSA 213-92 Class 1 Division 2 approved for hazardous areas
- CSA 22.2 #199 burner safety approval
- CSA 14-95 Industrial Process Equipment approval
United States
- FCC Part 15, Class 'A', Subpart B (2000)
European
- 94/9/EC : Equipment and Protective Systems Intended for use in
Potentially Explosive Atmospheres (ATEX)
- 89/336/EECV : EMC Directive as amended by 92/31/EC and 93/68/EEC
(EMC)
For distributor inquiries regarding this product and other Profire
Combustion products please contact us using the contact
page.
|
